65% Solder PCB for Phantom with Blocker — Felix Jen
Released on March 05, 2021
The Phantom is a PCB designed around the Maker Keyboards Phantom case. Due to the inclusion of a seamless 65% blocker, special cutouts needed to be included to allow the PCB to pivot into the case. Additionally, flex cuts were added to increase flexibility with the O-ring gasket mount system.
The PCB supports both QMK and VIA by default.
“That which yields is not always weak.”
— Jacqueline Carey, Kushiel’s Dart
Photos courtesy of Maker Keyboards:
For more photos of the Phantom PCB’s, see the Phantom Hotswap project page.
|PCB Material||Tg 150-160 FR4|
|Surface Finish||ENIG – 1U Thick|
|Soldermask||Matte Black – Custom|
|Maximum Power Consumption||50mA|
|Standby Power Consumption||14mA|
|Overall Dimensions||303mm x 93.8mm|
|Firmware Download (VIA)||Download Firmware|
|QMK Repository Firmware||QMK Github|
|VIA Repository||VIA Repository|
|Associated Plate File||Download Plate File|
The Phantom keyboard kit can be found at Maker Keyboards for worldwide orders. These keyboards kits are sold through limited group buy and in-stock orders and may not be available for purchase in the future.